one container cationic polyacrylamide flocculant powder with high quality

• 
• 
• 
• 
• 

• Classification: chemical auxiliary agent
• Appearance: white fine-sand shaped powder or granule
• CAS No.:9003-05-5325
• Type: cationic,anionic
• Formula: (C3h5no)N
• Solid Content: 88%min
• Application：drinking water treatment
• Transport Package: 25 kg /per bag, 1 ton bag
• Delivery: 3-5day

Send Inquiry

polymer water treatment of flocculation polyacrylamide

emulsion: 6 months, un-opened drum/tote. dry: up to 3 years, un-opened bag. polymer solution: depends of concentration, water quality. storage temperature: 40 f 90 f. do not allow emulsion to freeze. once frozen, thaw in heated area and mix well. handling. wear latex gloves and eye protection.

chemical polyacrylamide water process solutions,(polyacrylamide). dry: when the polymeric flocculant was first developed, the only type available was a dry powder form. dry forms typically contain greater than 90% active polymer and need more time for complete dissolution and activation than emulsion polymers. dry polymers can be delivered in 50 lb bags or “super sacks” as large as

water soluble polymer flocculants synthesis

flocculants with less than 1% charged functional groups are considered as nonionic flocculants. 34 nonionic flocculants normally have high molecular weights, which helps them flocculate suspended particles through the bridging mechanism. 35 polyacrylamide is the most important water soluble nonionic flocculant because its monomer, acrylamide

optimizing the flocculation effect of cationic polyacrylamide,cationic polyacrylamide (cpam) is a commonly used flocculant for water treatment. factors that affect the flocculation effect and can be controlled manually include the type and dosage of cpam, wastewater ph, stirring time and settling time, and their reasonable setting is critical to the flocculation effect of cpam. in this paper, the optimal flocculation conditions of a novel cpam were

synthesis and evaluation of cationic polyacrylamide flocculant

this study addresses the challenge of microalgae harvesting through the development of flocculants. two positively charged cationic polymers including poly[2 (acryloyloxy)ethyl]trimethylammonium chloride (paetac) and poly(3 acrylamidopropyl)trimethylammonium chloride (pamptac) were synthesized using the uv-induced radical polymerization, for harvesting both freshwater and marine microalgae.

polyaluminium chloride and anionic polyacrylamide water,water treatment residuals produced after addition of polyaluminium chloride and anionic polyacrylamide (pac-apam wtrs) were evaluated for the potential to remove cd2+ and zn2+ from aqueous solutions by batch adsorption studies. the maximum adsorption capacity obtained from langmuir modeling was 85.5 mg cd2+/g pac-apam wtrs or 25.6 mg zn2+/g pac-apam wtrs. a dubinin-radushkevich (d-r) model

flocculation properties and kinetic investigation of sale

charge neutralization and adsorption capacity should be enhanced simultaneously to obtain the desired flocculation efficiency for high turbid water. thus, cationic polyacrylamide flocculant with different cationic monomer contents was prepared through low-pressure uv initiation for high turbid water flocculation, and the flocculation polyacrylamide flocculant

cationic polyacrylamide (cpam).Cationic polyacrylamide flocculant is mainly used to flocculate negatively charged colloids. It has the appearance of white powder and has the functions of turbidity removal, decolorization, adsorption, and adhesion.

research on a new cationic polyacrylamide (cpam) with high quality

flocculation is a common method to improve filtration efficiency and purify water quality in water supply plants where the commonly used flocculant is cationic polyacrylamide (cpam) (vandamme et al. 2010; teh et al. 2016). for sludge dewatering, cpam shows superior conditioning performance and obtained more and more attention.

biopolymer-based flocculants a review of recent technologies,among organic flocculants, polyacrylamide (pam) is one of the most commonly used (taylor et al. 2002). beside its use as a flocculant, it is also widely used as cross-linking agent, thickener, liquid resistance reducer, and oil liquefying agent (yen and yang 2003), so that its market demand may continue to increase.

enhance paper quality with chemical polyacrylamide boost efficiency

its function is to improve the quality of paper, improve the pulp dehydration performance, improve the retention of fine fibers and fillers, and reduce the consumption of raw materials and environmental pollution. polyacrylamide could be used as paper dispersant, paper residence filter aid. the paper fibers and fillers in pulp are hydrophobic

anionic polyacrylamide apam for water tank cleaning chemical,classification: chemical auxiliary agent: appearance: white to off-white crystalline granular: molecular weight: 8-15million: cas no. 9003-05-8: package: one 20’fcl load in 18-20mt for usual

synthesis and application of anionic polyacrylamide in water

this paper will provide a review of the existing knowledge but also recent advances on the manufacturing and end uses of acrylamide-based polymers following the reen chemistryconcept and 100 years after the revolutionary publication of staudinger on macromolecules.

homopolymerization pam -best price polyacrylamide,homopolymerization polyacrylamide. characteristics: this product adopts the homopolymerization of acrylamide before adding alkali hydrolysis.after granulating,dring,pulverizing,the appearance of the product is white granule powder.the product will be better used in sewage treatment,especially for wastewater from iron and steel plant,electroplating,metallurgical and coal factory.

removal of direct dyes from wastewater using chitosan flocculant

however, its high cost makes it less commonly used. as a result, signicant e˝orts have been made gel was obtained by dissolving 3 g of anionic polyacrylamide powder into 1000 ml of deionized

anionic polyacrylamide polymer msds,purchase spectacular anionic polyacrylamide polymer msds at our company and experience awesome efficiency. the anionic polyacrylamide polymer msds are available at captivating promos that are simply irresistible.

water treatment flocculation: which flocculation agent is best?

polyacrylamide is a polymer-based flocculant that is widely used in the treatment of water, ranging from waste water to drinking water. it is often used as an anionic — or negatively charged — flocculant and is popular in industry, thanks to its broad availability and relative safety when in use or in storage.

synthesis of branched cationic flocculant and its performance,the flocculant was used to capture heavy metals. when the flocculant dosage was 20 mg/l, the removal rates of cu 2+ and cd 2+ was 96.12 % and 91.58 %, respectively, which were about 2.5 times and 1.5 times cs and cs-ma. the branched structure of pam-g-m (cs-ma) promoted the formation of large and stable flocs through adsorption and bridging