10ton PAC for chemical flocculant polymer cost in Nairobi

• Product Name: poly aluminium chloride water treatment
• Basicity: 80-95%
• CAS No.:1327-41-9
• Appearance: yellow granules
• Purity: 28%,30%
• Formula: [AL2(OH)nCl(6-n)]m m≤10,n≤5
• Origin: Made in China
• Package: one 20’fcl load in 15-18mt palletized
• Usage: printing and dyeing waste water

Send Inquiry

polymer 101: fundamentals of flocculation

polymer particle size: 0.1 -2 mm cost: high emulsion polymer cationic, anionic, non-ionic molecular weight: up to 10 m (cationic), up to 20m (anionic, non-ionic) 30 -60% active polymer gel size: 0.1 -2 µm cost: high solution polymer (mannich) cationic only molecular weight: up to 10 m 4 -6% active cost: low limited usage 10 9

biopolymer-based flocculants: a review of recent technologies,biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. in recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants

polyaluminium chloride dosing effects on coagulation

the average pac dose, since its introduction in december 2016, was 33.2 mg/l, with minimum and maximum dosages of 14.1 and 43.8 mg/l. since pac’s introduction, the turbidity of the flocculated water has remained fairly stable, within the range 3.5 to 6.1 ntu. when alum was in use, the range was 2.0 to 6.4 ntu . over the years, high turbidity

optimization of polyaluminum chloride-chitosan flocculant for sale,however, cts is more expensive than traditional chemical flocculants . polyaluminum chloride (pac) is a cheaper water-soluble inorganic polymer flocculant (ipf) with properties such as adsorption, coagulation, and precipitation [14,15], so it is widely applied to water treatment (yang et al., 2014; ali and kim 2016). but pac also has some

polymer based flocculants: review of water purification

when employing each polymer specifically, al dawery [110] demonstrated that combining a blend of polycarbonate and polyacrylic acid for flocculation results in improved liquid clarity. the combination of flocculants could raise the sludge volume index by 70%, compared to 40% in the case of polycarbonate alone.

the water company–the premiere destination for water treatment,about the water company. “the water company” is the premiere destination for water treatment solutions and water shop business. its reputation in providing ground-breaking operations within genres such as domestic, commercial and community based ro plant landmarked it as the go-to organization in the region.

how to select a chemical coagulant and flocculant. sswm

1% solution is defined as being 1% by weight, i.e 1g (or 1000 mg) of chemical in 99g (or 99 ml) of water for a total of 100g. 1 ml of this 1% solution will contain. 1 × 1000 mg 10 mg 100. this added to 1 litre is 10 mg per litre, or. 10 mgl-1 (or 10 ppm) thus 1g 1 ml 0.746 ml.

polymer flocculants poly aluminium chloride,polymer flocculants are high molecular weight polymers and have hydrogen-bonding groups and/or ionic groups in the molecule. polymer flocculants promote the separation of particles from water to clean water. historical background polymer flocculants have a collecting and precipitating function. polymer flocculants tend to be used in

inorganic polymer flocculants? all you need to know about pac

low temperature has little effect on polymer flocculants. however, it should be noted that when using organic polymer flocculants, the water temperature should not be too high. high temperature will easily cause the organic polymer flocculants to age or even decompose to produce insoluble substances, thereby reducing the coagulation effect.

coagulants and flocculants in polymer water treatment,the next chemical reaction is called flocculation, which helps create even larger flocs or macro-flocs. in this step, a water-soluble polymer, or flocculant, helps bring together the coagulated particles to form longer and larger particle chains. as the flocculant chains become larger, they become heavier and even visible to the naked eye.

inorganic polymer flocculants? all you need to know about pac

at present, there are dozens of types of inorganic polymer flocculants, and the output has reached 30% to 60% of the total output of flocculants. among them, the most commonly used and widely used is poly-aluminium chloride, or pac. al (ⅲ) and fe (ⅲ) hydroxyl and oxygen-based polymers will be further combined into aggregates, which are kept

flocculant an overview sciencedirect topics,flocculants are divided into three categories: (i) mineral supplements such as pac, synthetic organic polymers, and (iii) flocculants found in nature (renault et al., 2009). interestingly, recovered lignin from pulp wastewater can be used as a flocculating agent and fuel.

swim pool water treatment chemic suppliers

africa 40%, mid east 30%, southeast asia 20% tags: sulphuric acid supplier hydrochloric acid price in malaysia poly aluminium chloride supplier pac poly aluminium chloride

poly aluminum chloride pac white light yellow powder poly aluminium,poly aluminum chloride pac buy poly aluminium chloride at best price of rs 125/kg by och chemicals amp systems. also find product list from verified suppliers with contact number

polyaluminium chloride in water treatment dia-chemical

polyaluminium chloride, or pac for short, is a chemical compound used during water treatment process. it is an acidic solution made from aluminium, chlorine, hydrogen and oxygen, and act as coagulating agent.

instead alum use poly aluminium chloride coagulant in water,pac=pacl. note: a) .the cost of poly aluminium chloride is twice/thrice of alum ( roughly the cost of pac-$0.4/ kg) b).one possible disadvantage in using poly aluminum chloride (pac) relates to the removal of dissolved organic carbon (doc) from water. it is well documented that effective doc removal is possible with alum,particularly when

poly aluminium chloride factory supply chemicals

polyaluminum chloride is applicable to a wide range of PH value, large particles, fast settling speed, widely used in drinking water, sewage, and industrial wastewater treatment.2. information of major ingredients. chemical name. cas no polyaluminium chloride liquid.

einecs no 234-933-1 aluminum chlorohydrate for water treatment,einecs no 234-933-1 aluminum chlorohydrate for water treatment . description: aluminum chlorohydrate ach is a kind of alkalization degrees (base) is higher than that of polyaluminium chloride, second only to that of aluminum hydroxide inorganic polymer compound, bridging polymerization by hydroxyl, molecules with the highest number of hydroxyl groups

poly aluminum chloride PAC price for water treatment

poly aluminium chloride, commonly abbreviated as pac, is an inorganic polymer that belongs to the family of aluminum salts. it is a compound primarily used as a coagulant and flocculant in water treatment processes. the poly aluminium chloride chemical formula can vary depending on its degree of polymerization, typically represented as [al2 (oh

best effect pac powder polyaluminium chloride,product name : polyaluminium chloride cas : 1327-41-9 formula: [al2(oh)ncl6-n]m synonyms: aluminum chlorohydrate; polyaluminium hydroxychloride, aluminium chloride hydroxide product use: water treatment chemical company identification manufacturer,poly aluminium chloride is a novel highly efficient inorganic polymer coagulant. It is cheap and has good flocculation efficiency.